• -RM51.00
Magma x JamgHe Industrial Grade High Tenacity Photopolymer Resin Series 500g
search
  • Magma x JamgHe Industrial Grade High Tenacity Photopolymer Resin Series 500g
  • Magma High Tenacity Photopolymer Resin Series 500g
  • Magma High Tenacity Photopolymer Resin Series 500g

Magma x JamgHe Industrial Grade High Tenacity Photopolymer Resin Series 500g

RM190.00
RM139.00 Save RM51.00
mag-hightenacity-500g-black
Colour: Black
Quantity
Product available with different options


We Accept:

acceptpayment

Magma High Tenacity Photopolymer Resin 500g

Introducing the Magma x JamgHe Industrial Grade High Tenacity Photopolymer Resin Series 500g. This resin is specifically designed for industrial applications, offering exceptional strength and durability.

With its industrial-grade formulation, this resin provides high-level stretching and impact resistance, making it ideal for demanding engineering projects. It is perfect for creating prototypes, functional parts, and intricate designs that require robust performance.

Compatible with most LCD, DLP, and MSLA 3D printers operating at a wavelength of 355-405nm, this resin offers versatility and ease of use. Simply load it into your printer, and you're ready to bring your industrial-grade projects to life.

Suggested Exposure Time (Based on 405nm UV)

(RGB )50 Micron: 6 to 10 sec / Base 80 to 100 Sec
(Mono) 50 Micron: 2 to 4 sec / Base 40 to 50 Sec

NOTE: The exposure time should be adjusted according to printer light energy, layer height and model structure.

Benefits:

- High Level Stretching

- Impact Resistance

- Complied with EN 71-3 safety standard.

Technical Data Specifications

Density (g/cm3):  1.05- 1.25
Viscosity (MPa·s): 300-650 
Hardness(Shore D): 75-78 D +/- 10%
Tensile strength (MPa)19.9 +/- 10%
Elongation at break (%): 75
Flexural strength (MPa): 12.6 +/- 10%
Flexural modulus (MPa): 420 +/- 10%
IZOD Impact Strength (j/m): 736
Maximum pulling strength: 830N +/- 10%
Wavelength: 355-405nm

Cleaning & Post Curing

Step 1 - Prepare two containers with IPA (> 95%), and place the object into the first container and gently shake it or gently brush it with a soft brush. After that soak it in the second container for about 1 minute

Step 2 -  Dry the object with cold air. Ensure it is fully dry.

Step 3-  Place the object in the UV Curing Chamber to cure. The curing time is proportional to the volume of the work piece and inversely proportional to the optical power of the curing chamber.

Storage 

  • Shake well before use, and leave it for 30 minutes to eliminate air bubbles generated from the shaking process.
  • Packed in opague UV safe bottle for ease of handling and safe storing.
  • Recommended storage temperature at 2-27°C (59-80°F) 
  • After use, it should be filtered and keep back in the opague UV bottle on time and placed in a dry and well ventilated place.
  • Store in cool and dry place, and avoid sunlight, recommended temperature at 25-30 degrees Celsius.

Important Safety Notices

  • Please wear mask and non-powdered nitrile gloves while handling with resin as the product is in a liquid state with slight odor.
  • Do not heat this product as photopolymer resins may produce vapours that may cause discomfort when exposed to high temperatures.
  • Keep the product out of children’s reach.
  • Avoid skin or eye contact with the uncured resin. If accidental contact occurs, please immediately rinse the affected area thoroughly using clean water.
  • Uncured resin in the tank may be harden if exposed to sunlight before disposal. Be aware when discarding uncured resin and do not dispose the uncured resin directly into the sink. 
  • After printing, please clean the uncured resin on the surface of the printed object using isoprophyl alcohol.
  • Dispose of waste in accordance with local environmental regulations.

Sold by 3D Gadgets Malaysia

mag-hightenacity-500g-black

Data sheet

Weight
500g
Shore Hardness
75-78D
Comments (0)
No customer reviews for the moment.