FlashForge Marble PLA Filament 1.75mm

New-upgraded Formulation. Anti-moisture ingredients. Stored For a longer time.

• Minimize filament problems such as warping, curling and bubbles during printing.
• The anti-moisture ingredients for longer storage time without loss of quality.
• Purest-grade material and manufactured in the dust-free workshop
• Preventing nozzle jams.
• Dimensional accuracy within +/- 0.02mm.

1. New-upgraded Formulation. Minimizing Filament Problems. Stored For a longer Time.

The New-upgraded formulation engineered by FlashForge helps to minimize filament problems such as warping, curling and bubbles during printing.

The anti-moisture ingredients included in this formulation permits longer storage time without loss of quality. Always use up each inch of the filament.

2. PUREST MATERIAL. STRICT QUALITY CONTROAL STANDARDS. GREAT QUALITY.

Flashforge Marble PLA filament is composed of the purest-grade material and manufactured in dust-free workshop to keep out dust and foreign particles, preventing nozzle jams and yielding smooth 3D models.

Each FFlashforge Marble PLA filamen is diameter-detected to guarantee dimensional accuracy within +/- 0.02mm. Always consistent!

Every Flashforge Marble PLA filamen undergoes strict quality test using the largest 3D model that requires 48 hours of print time, printed at minimum layer thickness to ensure quality and reliable prints.

Applications

• For all FFF/FDM printers
• Suitable for models that need marble appearance.

Specifications:

Diameter: 1.75MM

Tolerance Level: ±0.02MM

Print Temperature: 190-220°C

Print Speed: 60-90mm/s

Suggested Printing Layer Resolution: 0.1mm- 0.2mm

Base Plate Temperature: 0-60°C

Recommended Storage Temperature : -20 to 50°C