Bambu Lab X1 Series & P1P Bambu High Temperature Plate PEI

Bambu lab X1 Series & P1P Bambu High Temperature Plate PEI

Things to know before use

- Variations in the color and luster of the Engineering Plate appearance and the removal of the exposed metal areas are just minor adjustments to optimize the production process and surface quality. If the coating remains on the nozzle when the nozzle is wiped, it will be heated and melted before printing the model. Such changes do not affect leveling, Lidar, adhesion, or range of use. You can purchase with confidence!

- Before auto-leveling, it is necessary to repeatedly rub the nozzle in the special wiping area of the build plate to completely remove any residual material at the tip of the nozzle. The coating in the special-designed wiping area will gradually become worn over time. This is normal and does not affect print quality or nozzle lifetime, so there is no need to worry about any quality issues.

- Bambu Lab recommends only using Bambu Lab official glue on the Cool Plate, and can not be held responsible for any damage caused to plates as a result of using third-party glue on build plates.

Overview

The Bambu High-Temperature Plate is a sticker that is applied to the Bambu Engineering Plate which can be used on both sides. This is a consumable printing surface that is used in conjunction with a thin coat of glue stick and works well with most common filaments and scenarios.

The Bambu High-Temperature Plate leaves a smooth finish to the model that comes in contact with the High-Temperature Plate, and might require a bit of post-processing for cleaning up the glue stick.

Sold by 3D Gadgets Malaysia