FlashForge PETG PRO Filament 1.75mm Series 1KG

FlashForge PETG PRO Filament 1.75mm Series 1KG

NOTE: Green, Blue and Rose is in normal PETG i.e. "PETG Green"

New-upgraded Formulation. Anti-moisture ingredients. Stored For a longer time.

• Minimize filament problems such as warping, curling and bubbles during printing.
• The anti-moisture ingredients for longer storage time without loss of quality.
• Purest-grade material and manufactured in the dust-free workshop
• Preventing nozzle jams.
• Dimensional accuracy within +/- 0.02mm.

PUREST MATERIAL. STRICT QUALITY CONTROL STANDARDS. GREAT QUALITY.

Flashforge PETG PRO filament is a toughened PETG Pro 3D printing consumable specially developed to provide

- Higher strength
- Stronger mechanical properties
- Better liquidity.

With the multiple printing test, this PETG Pro filament has low shrinkage, good adhesion between layers, and excellent printing result.

Flashforge PETG PRO is composed of the purest-grade material and manufactured in dust-free workshop to keep out dust and foreign particles, preventing nozzle jams and yielding smooth 3D models.

Each Flashforge PETG PRO filament is diameter-detected to guarantee dimensional accuracy within +/- 0.02mm. Always consistent!

Every Flashforge PETG PRO filament undergoes strict quality test using the largest 3D model that requires 48 hours of print time, printed at minimum layer thickness to ensure quality and reliable prints.

Specifications:
Diameter: 1.75MM
Tolerance Level: ±0.02MM
Print Temperature: 220-240°C
Bed Temperature: 25- 80°C
Print Speed: 30-50mm/s
Suggested Printing Layer Resolution: 0.1-0.2mm
Density （ASTM D1505): 1.26~1.28g/ cm3
Tensile Strength: ≥53MPa
Flexural Strength: ≥80MPa
Melt Index （240℃,2.16K）: 5~8g/10min
Impact Strength (IZOD, ASTM D256) : 90J/m
Elongation at Break: ≥70%
Distortion Temp.: ≥74°C
Recommended Storage Temperature : -20 to 50°C

Storage
- After each print, we recommended storing printer filament in a sealed plastic bag or box to prevent be affected with moisture.

- Friendly Reminder(After Use):Be sure to insert the free end of the filament into the hole to avoid the filament being tangled for next time use