Bambu Lab X1 Series & P1P Spare Sheet for Bambu Cool Plate

Bambu lab X1 Series & P1P Spare Sheet for Bambu Cool Plate 3D Printer

Guide to install: https://www.youtube.com/watch?v=W1EMD77gOkQ

Overview

The Bambu Cool Sheet is a sheet with an adhesive side for replacing the sheet on your Cool Plate.

Compatibility

X1 Series, P1P

Note

- The Bambu Cool sheet is easy to replace and install.

- After tearing off the original sheet, please use alcohol to wipe the surface clean. Make sure the surface stays dry while applying a new sheet.

- You can use an anhydrous ethanol solution or isopropanol solution with a concentration of over 90% to wipe the plate.

- You can also use detergent and water to clean the surface.

It is also best to use special solid glue (Glue Stick for Build Plate) before printing to avoid damage during model removal.

HINTS: The STL file of the "Fixture" shown in the video can be found in the printer internal memory or download from here https://wiki.bambulab.com/en/knowledge-sharing/Links-to-STL-models

How to print your Film Sticking Fixture？

Bambu Lab 3D printer with two film sticking fixture models to help you change spare sheets. Print 'Film Sticking Fixture' from the built-in files!

Sold by 3D Gadgets Malaysia