PolyMaker PolyMide™ CoPA Nylon 1.75mm 0.75KG 3D Printer Filament

PolyMaker PolyMide™ CoPA Nylon 1.75mm 3D Printer Filament 

PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C. 

Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of micro-structure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification.

Does PolyMide™ CoPA requires an enclosed printer?

No, all our Nylon features our Warp-Free™ Technology which means it does not require a heated bed or heated chamber of more than 50˚C.

PolyMide™ CoPA can be printed on a 30-40˚C bed without enclosure.

Printing, Drying and Annealing Settings?

Printing Temperature: 250˚C - 270˚C

Bed Temperature: 25˚C - 50˚C

Printing Speed: 30mm/s - 50mm/s

Fan: OFF

Direct Drive:

Retraction Distance: 3mm

Retraction Speed: 50mm/s

Indirect Drive:

Retraction Distance: 6mm

Retraction Speed: 60mm/s

Drying Settings: 100˚C for 6h

(Only if the material has absorbed moisture)

Annealing Settings: 80˚ for 6h

Do you need to anneal PolyMide™ CoPA?

PolyMide™ CoPA displays outstanding mechanical and thermal properties when fully crystallized. The printed part will not reach full crystallization after the printing process, an additional step is required: Annealing.

You can anneal PolyMide™ CoPA by placing your part in the oven at 80˚C for 6h.

Spool Dimensions:

1kg cardboard spool:

Spool Inner Hole Diameter: 55±1mm

Spool Diameter: 200±1mm

Spool Width: 65.6±2mm

Spool Weight: 140±7g

Package Includes:

1 x PolyMaker PolyMide™ CoPA Nylon 1.75mm 0.75KG 3D Printer Filament

Sold by 3D Gadgets Malaysia