Magma 12K Engineering Pro Photopolymer Resin 1KG
Benefits:
- High Toughness with Tenacity
- Improve Strength / Impact after annealing at 80 degree for 1 hour
- High Impact Resistance
- Suitable for miniature / Prototype / functional objects like
- Complied with EN 71-3 safety standard.
Magma Engineering Pro Photopolymer Resin 1KG
This formulation provides high toughness with tenacity, high impact resistance and suitable for functional objects. By annealing at 80 degree for 1 hour will improve strength of the object for further testing. It does not consist any volatile organic chemicals (VOC's) and EN 71-3 safety standard. Suitable for most LCD/ DLP/ MSLA 3D Printer with 355-405nm wavelength.
Suggested Exposure Time (Based on 405nm UV)
(RGB) 50 Micron: 8 sec to 11 sec/ Base 70 to 100 Sec
(Mono) 50 Micron: 3 sec to 4 sec/ Base 25 to 35 Sec
NOTE: The exposure time should be adjusted according to printer light energy, layer height and model structure.
Benefits:
- High Toughness with Tenacity
- Improve Strength / Impact after annealing at 80 degree for 1 hour
- High Impact Resistance
- Suitable for miniature / Prototype / functional objects like
- Complied with EN 71-3 safety standard.
Sold by 3D Gadgets Malaysia