Magma 12K Engineering Pro Photopolymer Resin 1KG

Magma Engineering Pro Photopolymer Resin 1KG

This formulation provides high toughness with tenacity, high impact resistance and suitable for functional objects. By annealing at 80 degree for 1 hour will improve strength of the object for further testing. It does not consist any volatile organic chemicals (VOC's) and EN 71-3 safety standard. Suitable for most LCD/ DLP/ MSLA 3D Printer with 355-405nm wavelength.

Suggested Exposure Time (Based on 405nm UV)

(RGB) 50 Micron: 8 sec to 11 sec/ Base 70 to 100 Sec

(Mono) 50 Micron: 3 sec to 4 sec/ Base 25 to 35 Sec

NOTE: The exposure time should be adjusted according to printer light energy, layer height and model structure.

Benefits:

- High Toughness with Tenacity

- Improve Strength / Impact after annealing at 80 degree for 1 hour

- High Impact Resistance

- Suitable for miniature / Prototype / functional objects like

- Complied with EN 71-3 safety standard.

Sold by 3D Gadgets Malaysia