Magma Dental Pro Model Resin 1KG for MSLA DLP 3D Printer

Magma Dental Pro Model Resin

Designed for the manufacturing of dental models, Magma Dental Model Resin is used to print a wide variety of dental application, like orthodontic, restoration, implants etc.

Professional LCD molding resin. Optimize the formation of LCD low light source and printing efficiency is higher than the market compatible DLP / LCD / SLA resin. The resin is designed for the LCD/ DLP model of the resin Printers.

High-speed solidify. This resin ensures the strength of molded parts and not excessive shrinkage, but also improve print speed, shorten the curing time and enhance the printing efficiency of LCD machines as much as possible.

Strong adhesion of the model and easy to detach after forming. Not only a high success rate of printing and precision but also to minimize resin release force and adhesion, so that the model attached to the forming platform can easily shovel and low viscosity makes it easier to clean the machine and model.

The material is rigid and tough. Strong material in the shovel model can easily lead to the model fragmentation, but too flexible material will be prone to the details of the print tensile deformation or fracture, which will affect the molding accuracy and aesthetics.

Model's performance is stable. The resin is stable under different climatic conditions and is also easy to store, overcoming the shortcomings of other resins easily damp softening and environmental corrosion.

Suggested Exposure Time (Based on 405nm UV)

(RGB) 50 Micron: 8 sec to 11 sec / Base 70 to 100 Sec

(Mono) 50 Micron: 2.5 sec to 4.5 sec / Base 20 to 30 Sec

NOTE: The exposure time should be adjusted according to printer light energy, layer height and model structure.

Sold by 3D Gadgets Malaysia