Bambu Lab P1P to P1S Upgrade Kit

Bambu Lab P1P to P1S Upgrade Kit

Overview

The Bambu Lab P1P to P1S Upgrade Kit contains all you need to upgrade your P1P 3D printer to a P1S 3D printer (excluding the Bambu Textured PEI Plate).

The glass cover plate, front glass door, left/right plastic panels, rear metal panel, front cover can enclose the P1P 3D printer. 

The auxiliary part cooling fan, control board fan, and chamber temperature regulator fan can aid heat dissipation to achieve high-speed printing.

The cable chain and P1S toolhead cable can ensure reliable performance during repetitive bending as a result of motion. The 550mm PTFE tube of the X1 Series is better, as it allows more ample movement of the filament, and lowers the extra abrasion.

Additionally, customers can also purchase a hardened steel extruder gear and a hardened steel hotend to allow printing with more abrasive filaments containing carbon fiber and glass fiber.

Note: After performing the upgrade from P1P to P1S using this kit, the printer definition will remain the same. It is not possible to change the printer definition from P1P to P1S after the upgrade. Please follow all the guidance in the wiki article to ensure the correct operation after the upgrade.

In the Box

Enclosing Parts:

1. Glass Cover Plate

2. Front Glass Door

3. Front Door Mounting Kit

4. Left Plastic Panel

5. Right Plastic Panel

6. Rear Metal Panel

7. Front Cover

Upgrade Parts:

8. Activated Carbon Air Filter

9. Auxiliary Part Cooling Fan

10. Control Board Fan

11. Chamber Temperature Regulator Fan

12. Cable Chain Assembly

13. P1S Toolhead Cable

14. PTFE Tube

Total Weight: 6.3 kg

Installation Guide

1. Please finish the installation of Cable Chain Assembly and P1S Toolhead Cable first by following the instructions on Bambu Lab Wiki.

2. Please throughly read the instruction article on Bambu Lab Wiki for the Upgrade Kit installation.

3. Please note that the left and right side panels of the P1P may be incompatible with the base and require shaving off two tabs on the bottom of side panels for successful installation.

Link: https://wiki.bambulab.com/en/p1/manual/p1p-to-p1s

Sold by 3D Gadgets Malaysia

Package Includes:

1 x Bambu Lab P1P to P1S Upgrade Kit