BIGTREETECH Manta M4P / M8P 32bit Mainboard

BIGTREETECH Manta M4P / M8P 32bit Mainboard

The Bigtreetech Manta series control board is a great choice for anyone who wants to take their 3D printing experience to the next level. With its stability, compatibility, rich expansion ports, customizable stepper drivers, and board to board direct connection Designed with the same connector with Raspberry Pi / all versions of CM4, and definitely, CB1 or CB1 eMMC, make easier way to run a Klipper firmware for fast printing speed. It’s a popular choice among 3D printer enthusiasts.

User manual link

PI4B : https://github.com/bigtreetech/PI4B-Adapter/tree/master/Hardware

CB1

OS Image :https://github.com/bigtreetech/CB1/releases

Source Code :https://github.com/bigtreetech/CB1-Kernel

M4P :https://github.com/bigtreetech/Manta-M4P

M8P :https://github.com/bigtreetech/Manta-M8P

Marlin :https://github.com/bigtreetech/marlin/tree/Manta

Note:

- The CB1 couldn't be connected to the PI TFT screen. The DSI/CSI port will only work while using CM4.

- The PI4B should be used with CB1 or CM4 core board to run Klipper.

✅ Installed with 32-bit 64MHz ARM® Cortex-M0+ STM32G0BORE chip, more stable and faster.

✅ Designed with the same connector with Raspberry Pi, giving you a confident connection with all versions of CM4,definitely, CB1. Also, a screw-reinforced installation is also avaliable.

✅ TPS5450-5A Power Chip The 5A output perfectly matches the power supply need of Raspberry Pi.

✅ It has rich expansion ports, can support various expansion modules, such as BL Touch, LCD screen, RGB light, auto shutdown, etc.

**M4P & CB1 can be the best choice for Voron V0, Ender 3 etc.

✅ Installed with 32-bit 64MHz ARM® Cortex-M0+ STM32G0BORE chip, more stable and faster.

✅ Designed with the same connector with Raspberry Pi, giving you a confident connection with all versions of CM4,definitely, CB1. Also, a screw-reinforced installation is also avaliable.

✅ TPS5450-5A Power Chip The 5A output perfectly matches the power supply need of Raspberry Pi.

✅ It has rich expansion ports, can support various expansion modules, such as BL Touch, LCD screen, RGB light, auto shutdown, etc.

✅ Selectable CNC fan voltage, 5V/12V/24V.

✅ Added eFuse circuit protection. It will faster disconnected on overload, and automatically reset if the overload is gone, greatly reduce the motherboard burnout.

✅ Reserved Can Bus port can be connected with EBB CAN, which will simplify the wiring and provide strong anti-interference ability.

**The M8P & CB1 can be the best choice for Voron 2.4, VzBot, etc.

Package Includes:

1 x BIGTREETECH Manta M4P or M8P mainboard

Sold By 3D Gadgets Malaysia