Bigtreetech BTT SKR 3 EZ V1.0 Control Board
RM295.00
Features
- Using 32-bit ARM Cortex-M7 series STM32H743VI main control chip with a main frequency of 480MHz.
-The power chip adopts TPS5450-5A, which supports DC12/24V power input. The output current of the chip is up to 5A, and the peak value can reach 6A.
-The numerical control fan realizes 24V, 12V, 5V voltage selection through the external power supply module.
-The thermistor can select the pull-up resistance value through the jumper, and support PT1000 in this way without the need for external modules.
-WIFI module (ESP-12S, ESP-07, ESP32)
-Onboard EEPROM
-Two types of CAN interfaces are reserved, USB port and XH2.54 6Pin terminal interface.
-The motor power supply supports up to 48V, and for the larger voltage when using TMC5160 and EZ5160.
We Accept:
Bigtreetech BTT SKR 3 EZ V1.0 Control Board for Ender 3 / Ender3/ Ender 5 plus/ CR10 Creality 3D Printer
Manual for SKR E3 EZ
https://cdn.shopifycdn.net/s/files/1/1619/4791/files/BIGTREETECH_SKR_3_EZ_User_Manual.pdf
https://github.com/bigtreetech/SKR-3
Features
- Using 32-bit ARM Cortex-M7 series STM32H743VI main control chip with a main frequency of 480MHz.
-The power chip adopts TPS5450-5A, which supports DC12/24V power input. The output current of the chip is up to 5A, and the peak value can reach 6A, which perfectly supports the power supply of Raspberry Pi.
-The numerical control fan realizes 24V, 12V, 5V voltage selection through the external power supply module, eliminating the need for the operation on external transformer module, thereby reducing the probability of damage to the motherboard.
-The thermistor can select the pull-up resistance value through the jumper, and support PT1000 in this way without the need for external modules, convenient to DIY.
-Supports functions: resume printing, Filament Runout Detection, Completed Shutdown, BLTouch, RGB Lights, etc.
-WIFI module (ESP-12S, ESP-07, ESP32)
-Onboard EEPROM
-Two types of CAN interfaces are reserved, USB port and XH2.54 6Pin terminal interface. The USB port is used to select CAN and USB through the double-pole double-throw switch, convenient to use other accessories of the CAN interface.
-The motor power supply supports up to 48V, and for the larger voltage when using TMC5160 and EZ5160, an isolation chip is used to protect the mainboard from burning IO.
Specification:
-MCU : STM32H743VIT6, 480MHz
-Power regulator: TPS5450, 5A
-Firmware support: Marlin, Kipper, RRF
-Individual driver voltage selection: MOT/VIN 48V MAX
-Fan voltage selection: 24V/12V/5V voltage selection (optional external module needed for voltage selection)
-Jumper selectable 4k7/1k pull up for PT1000 sensors: 4k7/2k2
-Fan ports: 3 PWM fans, 3 always-on fans
-Fuses: Automotive
-Double Z-axis
-Thermal runaway protection
-Flyback protection
-New EZ socket
-CAN-Bus interface
-Thermistor protection
-TMC Diag jumpers
Package Includes:
1 x Bigtreetech BTT SKR 3 EZ V1.0 Control Board with connectors
1 x USB Cable
Sold by 3D Gadgets Malaysia
Prt0811
Data sheet
- Warranty
- 3 Months Against Manufacturing Defects Only.
Comments (0)
No customer reviews for the moment.
Features
- Using 32-bit ARM Cortex-M7 series STM32H743VI main control chip with a main frequency of 480MHz.
-The power chip adopts TPS5450-5A, which supports DC12/24V power input. The output current of the chip is up to 5A, and the peak value can reach 6A.
-The numerical control fan realizes 24V, 12V, 5V voltage selection through the external power supply module.
-The thermistor can select the pull-up resistance value through the jumper, and support PT1000 in this way without the need for external modules.
-WIFI module (ESP-12S, ESP-07, ESP32)
-Onboard EEPROM
-Two types of CAN interfaces are reserved, USB port and XH2.54 6Pin terminal interface.
-The motor power supply supports up to 48V, and for the larger voltage when using TMC5160 and EZ5160.