- -RM77.00
- New
• Supports three filament types – Compatible with 1.75mm PLA, ABS and PCL for different creative projects.
• LCD display – Check printing information and monitor the pen’s working status.
• 8 adjustable speeds – Control filament flow for fine details or larger shapes.
• Real-time temperature adjustment – Change temperature and speed without pausing extrusion.
• Comfortable ergonomic grip – Easy to hold and guide while drawing.
• Detachable pen tip – Remove and replace the tip without tools for easier maintenance.
• Smart sleep function – Enters sleep mode after 1 minute of inactivity or 8 minutes of continuous extrusion.
• External power support – Operates with a compatible power adapter or power bank.
• Six-button controls – Access filament selection, temperature, speed and extrusion functions.

Geeetech TG21 3D Pen / LCD Display / 1.75mm PLA ABS PCL / DIY 3D Drawing Pen
INTRODUCTION
Bring your ideas to life with the Geeetech TG21 3D Printing Pen in Grey. Create freehand 3D drawings, decorative shapes and DIY craft projects using compatible 1.75mm PLA, ABS or PCL filament. An LCD display, adjustable temperature and eight speed settings give you control as you draw.
FEATURES:
• Supports three filament types – Compatible with 1.75mm PLA, ABS and PCL for different creative projects.
• LCD display – Check printing information and monitor the pen’s working status.
• 8 adjustable speeds – Control filament flow for fine details or larger shapes.
• Real-time temperature adjustment – Change temperature and speed without pausing extrusion.
• Comfortable ergonomic grip – Easy to hold and guide while drawing.
• Detachable pen tip – Remove and replace the tip without tools for easier maintenance.
• Smart sleep function – Enters sleep mode after 1 minute of inactivity or 8 minutes of continuous extrusion.
• External power support – Operates with a compatible power adapter or power bank.
• Six-button controls – Access filament selection, temperature, speed and extrusion functions.
SPECIFICATIONS:
• Brand: Geeetech
• Model: TG-21 / TG21
• Product type: 3D pen
• Colour: Grey
• Compatible materials: PLA, ABS and PCL
• Filament diameter: 1.75 ± 0.02mm
• PCL temperature range: 60–100°C
• PLA temperature range: 160–210°C
• ABS temperature range: 180–210°C
• Speed settings: 8 levels
• Display: LCD
• Power supply: 5V / 2A, external
• Operating environment: 10–35°C; relative humidity below 85%
USAGE NOTE:
Select the correct filament mode and temperature before use. Avoid touching the heated nozzle or freshly extruded filament. Children should use the pen under adult supervision.







Sold by 3D Gadgets Malaysia.